Component catalog

Analog interconnect using pure long-grain zero-crystal copper in Acoustic Zen's matrix geometry, voiced for natural vocal and piano reproduction. Available in RCA and XLR termination.

Robert Lee's long-lived 10 AWG speaker cable built from 6N zero-crystal continuous-cast copper in an incrementally layered, multi-strand geometry. A Stereophile-reviewed classic that has remained in the line for over two decades.

The Big Silver Oval is Analysis Plus's premier silver speaker cable, using a pure-silver conductor wound over a stabilizing oxygen-free-copper strand in the company's patented hollow-oval, oval-coaxial geometry. It is the flagship of Analysis Plus's silver cable range, sitting above the standard Silver Oval model.

Budget classic from Analysis Plus using the brand's patented hollow-oval braided geometry to reduce skin effect and current bunching.

The Ansuz Darkz C2T Cable Lifter is a resonance-control cable support made by Ansuz Acoustics. It consists of two anodized-aluminum discs with three titanium interlayer balls between them; the upper disc is machined to provide space for the cable.

The Ansuz Darkz C3W is a resonance-control accessory made by Ansuz Acoustics, consisting of three discs with ball bearings that direct vibrations into small contact points. It uses copper discs and a copper shaft, wolfram balls, and a glass-blasted finish; each of the upper two discs floats on three interlayer balls. Its dimensions are 44.5 × 23.8 mm (1.75 × 0.94 inches), and it undergoes cryogenic treatment at approximately −321°F (−196°C), which the manufacturer states increases conductivity by 6–8%.

The Ansuz Darkz Feet are equipment feet designed to prepare audio equipment for use with Ansuz Darkz resonance-control devices. They use anodized aluminium with a three-disc design and are available in 4, 6, and 8 mm thread versions to fit most audio equipment.

Ansuz Acoustics Darkz S2t and T2 are resonance controllers designed primarily for use as equipment or loudspeaker feet, and can also be placed on top of electronics. The Darkz S2t consists of three stainless-steel rings, six titanium interlayer balls, and a central threaded coupler; it measures 45 mm in diameter and 25 mm in height. The Darkz T2 uses titanium rings with a glass-blasted surface and titanium balls between the rings; both models can be used with receptor feet that accommodate three additional titanium balls.

The Ansuz Darkz S3T Adjustable is a resonance-control device made by Ansuz Acoustics, consisting of three discs and ball bearings that provide mechanical grounding through small contact points. The upper two discs float on three interlayer balls each; the discs are stainless steel with a polished finish, the shaft is stainless steel, and the balls are titanium. It measures 44.5 × 23.8 mm (1.75 × 0.94 inches) and undergoes cryogenic treatment at approximately −321°F (−196°C), stated to increase conductivity by 6–8%.

The Ansuz Darkz S3T Adjustable is a resonance-control device made by Ansuz Acoustics, consisting of three discs and ball bearings that provide mechanical grounding through small contact points. The upper two discs float on three interlayer balls each; the discs are stainless steel with a polished finish, the shaft is stainless steel, and the balls are titanium. It measures 44.5 × 23.8 mm (1.75 × 0.94 inches) and undergoes cryogenic treatment at approximately −321°F (−196°C), stated to increase conductivity by 6–8%.

The Ansuz Darkz S3T Cable Lifter / Resonance Control is a cable-lifting and resonance-control product made by Ansuz. Its metal components undergo cryogenic treatment at approximately −321°F (−196°C), which contracts the crystal structure, displaces alloying elements from the grain structure, and is stated to increase conductivity by 6–8%.

The Ansuz Darkz S3W is a resonance-control audio product made by Ansuz. Its metal components undergo cryogenic processing at approximately −321°F (−196°C), causing the metal’s crystal structure to contract and alloying elements to be displaced from the grain structure. The treatment makes the structure similar to a monocrystal and results in a stated 6–8% increase in conductivity.

The Ansuz Darkz T2 Supreme Cable Lifter is a resonance-control cable support made by Ansuz Acoustics. It consists of two discs with three titanium interlayer balls between them; the upper disc is machined to provide space for a cable. The titanium discs receive an Ansuz Supreme coating applied using Hi-PIMS, comprising layers of zirconium and tungsten followed by aluminium titanium nitride, and the unit measures 44.5 × 23.8 mm (1.75 × 0.94 inches) in diameter × height.

The Ansuz Darkz T3W is a resonance-control and equipment-support device made by Ansuz Acoustics. It consists of three discs, with each of the upper two discs floating on three interlayer balls; the specifications list a 44.5 × 23.8 mm diameter-by-height size, titanium discs and shaft, wolfram balls, and a glass-blasted finish. The Darkz undergoes cryogenic treatment at approximately −321°F (−196°C), which the page states results in a 6–8% increase in conductivity.

The Ansuz Darkz T3W Adjustable / Resonance Control is an audio accessory made by Ansuz. The Darkz undergo cryogenic treatment at approximately −321°F (−196°C), which contracts the metal’s crystal structure and displaces alloying elements from its grain structure. This process makes the structure similar to a monocrystal and is stated to increase conductivity by 6–8%.

The Ansuz Darkz T3W is a cable lifter designed for resonance control. It undergoes cryogenic treatment at approximately −321°F (−196°C), causing structural changes in its metal components and producing a stated 6–8% increase in conductivity.

The Ansuz Darkz Z2 Signature is a resonance-control device made by Ansuz Acoustics, designed to absorb vibrations unrelated to the signal path. It consists of three discs, with each of the upper two discs floating on three tungsten interlayer balls; the discs have an Ansuz Signature coating comprising zirconium and tungsten, aluminium titanium nitride, and a final zirconium layer applied using Hi-PIMS. Its dimensions are 44.5 × 23.8 mm (1.75 × 0.94 inches), with six interlayer balls and three discs.

The Ansuz Darkz Z3W is a mechanical resonance-control device made by Ansuz Acoustics, consisting of three discs with ball-bearing interfaces. Each of the upper two discs floats on three interlayer balls, focusing vibrations into contact points for mechanical grounding. It has zirconium discs with a zirconium nitrate and hafnium finish, a titanium shaft, Wolfram balls, dimensions of 44.5 × 23.8 mm (1.75 × 0.94 inches), and cryogenic treatment at approximately −196°C (−321°F).

The Ansuz DC Linkz D-TC Gold Signature is a DC power cable accessory made by Ansuz for supplying power from an Ansuz PowerBox to compatible active Ansuz loudspeaker cables and loudspeakers. It uses two Ansuz Gold Signature conductors, with shielded gold and silver-plated copper conductors, and a twisted-cable construction for mechanical stability. The standard length is 1 m (39.4 inches), with termination options of Barrel DC Jack/Barrel DC Jack or Barrel DC Jack/BNC.

The Ansuz DC Linkz D-TC Supreme is a DC power cable accessory made by Ansuz for connecting an Ansuz PowerBox to compatible active-operation cables and loudspeakers. It uses two shielded, silver-plated copper conductors and a twisted-cable construction for mechanical stability. The cable is designed for power delivery rather than signal transmission and uses core materials shared with other Ansuz cable series.

The Ansuz Digitalz Copper Series is a digital audio cable product made by Ansuz. It is part of Ansuz’s third-generation cable range, using copper connector housings instead of aluminium; the page identifies copper as the material applied to the mid-tier A3, C3, and D3 series.

Ansuz Digitalz Steel is an audio cable manufactured by Ansuz and presented by Audio Group Denmark. It belongs to Ansuz’s third-generation cable range, which replaces aluminium connector housings with stainless steel; the page does not specify its topology or other product-level technical specifications.

Ansuz Digitalz – Titanium is an audio cable made by Ansuz. It belongs to the company’s third-generation cable range, which replaces aluminium connector housings with titanium in the top-of-the-line series; the page does not specify its connector configuration, conductor geometry, or other product-specific technical details.