Power Conditioning & Supplies

The Ansuz Darkz C3W is a resonance-control accessory made by Ansuz Acoustics, consisting of three discs with ball bearings that direct vibrations into small contact points. It uses copper discs and a copper shaft, wolfram balls, and a glass-blasted finish; each of the upper two discs floats on three interlayer balls. Its dimensions are 44.5 × 23.8 mm (1.75 × 0.94 inches), and it undergoes cryogenic treatment at approximately −321°F (−196°C), which the manufacturer states increases conductivity by 6–8%.

Ansuz Acoustics Darkz S2t and T2 are resonance controllers designed primarily for use as equipment or loudspeaker feet, and can also be placed on top of electronics. The Darkz S2t consists of three stainless-steel rings, six titanium interlayer balls, and a central threaded coupler; it measures 45 mm in diameter and 25 mm in height. The Darkz T2 uses titanium rings with a glass-blasted surface and titanium balls between the rings; both models can be used with receptor feet that accommodate three additional titanium balls.

The Ansuz Darkz S3T Adjustable is a resonance-control device made by Ansuz Acoustics, consisting of three discs and ball bearings that provide mechanical grounding through small contact points. The upper two discs float on three interlayer balls each; the discs are stainless steel with a polished finish, the shaft is stainless steel, and the balls are titanium. It measures 44.5 × 23.8 mm (1.75 × 0.94 inches) and undergoes cryogenic treatment at approximately −321°F (−196°C), stated to increase conductivity by 6–8%.

The Ansuz Darkz S3T Adjustable is a resonance-control device made by Ansuz Acoustics, consisting of three discs and ball bearings that provide mechanical grounding through small contact points. The upper two discs float on three interlayer balls each; the discs are stainless steel with a polished finish, the shaft is stainless steel, and the balls are titanium. It measures 44.5 × 23.8 mm (1.75 × 0.94 inches) and undergoes cryogenic treatment at approximately −321°F (−196°C), stated to increase conductivity by 6–8%.

The Ansuz Darkz S3W is a resonance-control audio product made by Ansuz. Its metal components undergo cryogenic processing at approximately −321°F (−196°C), causing the metal’s crystal structure to contract and alloying elements to be displaced from the grain structure. The treatment makes the structure similar to a monocrystal and results in a stated 6–8% increase in conductivity.

The Ansuz Darkz T3W is a resonance-control and equipment-support device made by Ansuz Acoustics. It consists of three discs, with each of the upper two discs floating on three interlayer balls; the specifications list a 44.5 × 23.8 mm diameter-by-height size, titanium discs and shaft, wolfram balls, and a glass-blasted finish. The Darkz undergoes cryogenic treatment at approximately −321°F (−196°C), which the page states results in a 6–8% increase in conductivity.

The Ansuz Darkz T3W Adjustable / Resonance Control is an audio accessory made by Ansuz. The Darkz undergo cryogenic treatment at approximately −321°F (−196°C), which contracts the metal’s crystal structure and displaces alloying elements from its grain structure. This process makes the structure similar to a monocrystal and is stated to increase conductivity by 6–8%.

The Ansuz Darkz Z2 Signature is a resonance-control device made by Ansuz Acoustics, designed to absorb vibrations unrelated to the signal path. It consists of three discs, with each of the upper two discs floating on three tungsten interlayer balls; the discs have an Ansuz Signature coating comprising zirconium and tungsten, aluminium titanium nitride, and a final zirconium layer applied using Hi-PIMS. Its dimensions are 44.5 × 23.8 mm (1.75 × 0.94 inches), with six interlayer balls and three discs.

The Ansuz Darkz Z3W is a mechanical resonance-control device made by Ansuz Acoustics, consisting of three discs with ball-bearing interfaces. Each of the upper two discs floats on three interlayer balls, focusing vibrations into contact points for mechanical grounding. It has zirconium discs with a zirconium nitrate and hafnium finish, a titanium shaft, Wolfram balls, dimensions of 44.5 × 23.8 mm (1.75 × 0.94 inches), and cryogenic treatment at approximately −196°C (−321°F).

The Ansuz Mainz A2 is a power cable made by Ansuz. It uses 36 double inverted helix Tesla coils, 13 shielded silver-plated copper ground-wire conductors, and 25 shielded silver-plated copper conductors. The cable has gold-plated pure-copper connectors, an anodized-aluminum housing, and a standard length of 1 m, with EU, US, GB 15- or 20-amp, and AUS terminations.

The Ansuz Mainz C2 Power cable is a power cord made by Ansuz. It consists of three twisted coaxial cables incorporating Direct Ground Connector Technology, Double Inverted Helix coils, and three noise-canceling coils. The C2 series design is intended to maintain low inductance and capacitance while eliminating peak electrical resonances.

The Ansuz Mainz D-TC Gold Signature is a power cable manufactured by Ansuz, with a standard length of 3 m and EU, US, GB 15 or 20 Amp, and AUS terminations. It uses shielded Gold Signature and silver-plated copper conductors and ground wire, gold-plated connectors, a Signature-coated housing, a double inverted helix Tesla coil topology, 128 active square Tesla coils, 16 third-generation analog dither circuits, and 36 active zirconium anti-aerial-resonance Tesla coils.

The Ansuz Mainz D-TC Supreme is a power cable made by Ansuz. It has a standard length of 3 m and is available with EU, US, GB 15- or 20-Amp, and AUS terminations. Its construction includes 2+24 shielded silver-plated-copper ground wires, 4+48 shielded silver-plated-copper conductors, a 72-element double inverted helix Tesla coil, gold-plated connectors, a Supreme-coated housing, 12×37 cm + 6×74 cm of anti-aerial-resonance Tesla coils, 128 active square Tesla coils, 16 dither-circuitry units, and 24 active cable Tesla coils.

The Ansuz Mainz D-TC2 is a power cable manufactured by Ansuz. It has shielded silver-plated copper conductors and ground wires, gold-plated pure-copper connectors, and an anodized-aluminum housing. Its configuration includes six double inverted helix coils, 128 active square Tesla coils, eight analog dither circuits, and anti-aerial-resonance Tesla coils measuring 6 × 74 cm.

The Ansuz Mainz D2 Power cord and Mainz8 D2 Power distributor are mains-power products made by Ansuz. The D2 power cables use Anti Aerial Tesla Coil technology and dither technology; the Mainz8 D2 distributor uses star-ground topology and is mounted with Ansuz feet prepared for Darkz resonance-control devices.

The Ansuz Mainz P2 is a power cable manufactured by Ansuz. It has six twisted cables, four shielded silver-plated-copper conductors, and a shielded silver-plated-copper ground wire, with gold-plated pure-copper connectors and an anodized-aluminum housing. The standard length is 1 m (39.4 inches), with EU, US, GB, 15- or 20-amp, and Australian termination options.

The Ansuz Mainz8 A2 is a power distributor made by Ansuz for Hi-Fi audio systems. It uses Star Ground technology, 31 active Tesla coils based on double-inverted coil topology, and 8 analog dither circuits; the cabinet is made from a natural-based composite material designed to reduce mechanical resonance. Specifications include dimensions of 495 × 236 × 78 mm, weight of 5.2 kg, an IEC C14 input rated at 230/110 V, and EU Schuko or US outputs.

The Ansuz Mainz8 A3 is a power distributor made by Ansuz for Hi-Fi audio systems. It uses a natural-based composite cabinet material, Ansuz Star Ground technology, double-inverted Tesla-coil noise cancellation, third-generation analog dither circuitry, and three active zirconium Tesla coils; the technology table also lists eight dither circuits (Gen. 3) and 31 active Tesla coils. Specifications are 500 × 263 × 91 mm (19.69 × 10.35 × 3.58 in), 5.2 kg (11.4 lb), with an IEC C14 input for 230/110 V and EU Schuko or US outputs.

The Ansuz Mainz8 C2 is a power distributor made by Ansuz for Hi-Fi audio systems. It uses a natural-based composite cabinet material, Ansuz Star Ground technology, double-inverted active Tesla coils, active cable Tesla coils, and analog dither technology; the page lists 24 active Tesla coils, 8 analog dither circuits, and 6 active cable Tesla coils. Specifications are 495 × 236 × 78 mm (19.49 × 9.29 × 3.07 inches), 5.3 kg (11.7 lb), IEC C14 input at 230/110 V, and EU Schuko or US output.

The Ansuz Mainz8 C3 is a power distributor made by Ansuz for Hi-Fi audio systems. It uses a natural-based composite cabinet material, Ansuz Star Ground technology, 24 active Tesla coils, 3 active zirconium Tesla coils, 6 active cable Tesla coils, and 3rd-generation analog dither circuitry with 8 circuits; its Tesla-coil topology uses paired coils wound in opposite directions. Specifications include an IEC C14 230/110 V input, EU Schuko outputs, dimensions of 50.0 × 26.3 × 9.1 mm, and a weight of 5.3 kg.

The Ansuz Mainz8 D-TC is a power distributor made by Ansuz for Hi-Fi audio systems. It uses a natural-based composite cabinet, Ansuz Star Ground technology, internal Ansuz Darkz resonance-control devices, 47 active Tesla coils, 94 active square Tesla coils, 8 analog dither circuits, and 27 active cable Tesla coils based on double-inverted coil topology. It measures 505 × 298 × 100 mm (19.88 × 11.73 × 3.94 inches), weighs 8 kg (17.6 lb), and has an IEC C14 input for 230/110 V with EU Schuko and US outputs.

The Ansuz Mainz8 D-TC 3 is a pure mains-connection power distributor made by Ansuz Acoustics. It has one 230/110 V IEC C14 input and eight gold-plated Schuko outputs, with star-shaped grounding and a central white socket serving as the ground reference. Its technical design includes double-inverted, parallel-connected Tesla coils, a dithering circuit, a non-magnetic housing, and a leather-covered lid intended to reduce vibrations.

The Ansuz Mainz8 D-TC3 Supreme is a power distributor manufactured by Ansuz for Hi-Fi audio systems. It uses a natural-based composite cabinet, a sandwich bottom plate made from heavy compact laminate with titanium layers, Ansuz Star Ground technology, internal Ansuz Darkz resonance-control devices, active and active-square Tesla coils, third-generation analog dither circuitry, and zirconium anti-aerial-resonance coils. Specifications list dimensions of 509 × 313 × 125 mm, weight of 8.1 kg, an IEC C14 230/110 V input, and EU Schuko and US outputs; the comparison table lists 18 active zirconium Tesla coils, 94 active square Tesla coils, 8 Gen. 3 dither circuits, and 47 active Tesla coils for the Supreme model.

The Ansuz Mainz8 D-TC Gold Signature is a power distributor made by Ansuz. It measures 509 × 313 × 125 mm, weighs 8.1 kg, uses an IEC C14 input rated at 230/110 V, and provides EU Schuko and US outputs. Its design includes a natural-based composite cabinet, a sandwich base plate with titanium layers, Star Grounding, 18 active zirconium Tesla coils, 94 active square Tesla coils, 8 third-generation dither circuits, 32 active Tesla coils, 27 active cable Tesla coils, Z2 Signature internal resonance control, and 27 anti-aerial resonance Tesla coils; its conductors are shielded, gold- and silver-plated copper.