Interconnects & Speaker Cables

Analog interconnect using pure long-grain zero-crystal copper in Acoustic Zen's matrix geometry, voiced for natural vocal and piano reproduction. Available in RCA and XLR termination.

Robert Lee's long-lived 10 AWG speaker cable built from 6N zero-crystal continuous-cast copper in an incrementally layered, multi-strand geometry. A Stereophile-reviewed classic that has remained in the line for over two decades.

The Big Silver Oval is Analysis Plus's premier silver speaker cable, using a pure-silver conductor wound over a stabilizing oxygen-free-copper strand in the company's patented hollow-oval, oval-coaxial geometry. It is the flagship of Analysis Plus's silver cable range, sitting above the standard Silver Oval model.

Budget classic from Analysis Plus using the brand's patented hollow-oval braided geometry to reduce skin effect and current bunching.

The Ansuz Darkz C2T Cable Lifter is a resonance-control cable support made by Ansuz Acoustics. It consists of two anodized-aluminum discs with three titanium interlayer balls between them; the upper disc is machined to provide space for the cable.

The Ansuz Darkz Feet are equipment feet designed to prepare audio equipment for use with Ansuz Darkz resonance-control devices. They use anodized aluminium with a three-disc design and are available in 4, 6, and 8 mm thread versions to fit most audio equipment.

The Ansuz Darkz S3T Cable Lifter / Resonance Control is a cable-lifting and resonance-control product made by Ansuz. Its metal components undergo cryogenic treatment at approximately −321°F (−196°C), which contracts the crystal structure, displaces alloying elements from the grain structure, and is stated to increase conductivity by 6–8%.

The Ansuz Darkz T2 Supreme Cable Lifter is a resonance-control cable support made by Ansuz Acoustics. It consists of two discs with three titanium interlayer balls between them; the upper disc is machined to provide space for a cable. The titanium discs receive an Ansuz Supreme coating applied using Hi-PIMS, comprising layers of zirconium and tungsten followed by aluminium titanium nitride, and the unit measures 44.5 × 23.8 mm (1.75 × 0.94 inches) in diameter × height.

The Ansuz Darkz T3W is a cable lifter designed for resonance control. It undergoes cryogenic treatment at approximately −321°F (−196°C), causing structural changes in its metal components and producing a stated 6–8% increase in conductivity.

The Ansuz DC Linkz D-TC Gold Signature is a DC power cable accessory made by Ansuz for supplying power from an Ansuz PowerBox to compatible active Ansuz loudspeaker cables and loudspeakers. It uses two Ansuz Gold Signature conductors, with shielded gold and silver-plated copper conductors, and a twisted-cable construction for mechanical stability. The standard length is 1 m (39.4 inches), with termination options of Barrel DC Jack/Barrel DC Jack or Barrel DC Jack/BNC.

The Ansuz DC Linkz D-TC Supreme is a DC power cable accessory made by Ansuz for connecting an Ansuz PowerBox to compatible active-operation cables and loudspeakers. It uses two shielded, silver-plated copper conductors and a twisted-cable construction for mechanical stability. The cable is designed for power delivery rather than signal transmission and uses core materials shared with other Ansuz cable series.

The Ansuz Digitalz Copper Series is a digital audio cable product made by Ansuz. It is part of Ansuz’s third-generation cable range, using copper connector housings instead of aluminium; the page identifies copper as the material applied to the mid-tier A3, C3, and D3 series.

Ansuz Digitalz Steel is an audio cable manufactured by Ansuz and presented by Audio Group Denmark. It belongs to Ansuz’s third-generation cable range, which replaces aluminium connector housings with stainless steel; the page does not specify its topology or other product-level technical specifications.

Ansuz Digitalz – Titanium is an audio cable made by Ansuz. It belongs to the company’s third-generation cable range, which replaces aluminium connector housings with titanium in the top-of-the-line series; the page does not specify its connector configuration, conductor geometry, or other product-specific technical details.

The Ansuz Digitalz A2 is an Ethernet cable made by Ansuz. It has a standard length of 1 m, RJ45 termination, gold-plated pure copper connectors, a chromed steel housing, and 4×2 twisted pairs. Its conductors are listed as 8+24 shielded, silver-plated copper, and its topology includes two passive end Tesla coils and one 1×148 cm passive cable Tesla coil using double inverted helix coils.

The Ansuz Digitalz C2 is a digital cable with BNC/RCA termination, manufactured by Ansuz. It has a standard length of 1 m, gold-plated connectors made of pure copper, shielded silver-plated copper conductors, and an anodized aluminium housing; its topology includes 12 double inverted helix Tesla coils and one anti-aerial-resonance coil.

Ansuz Acoustics’ Digitalz Ethernet Cable DT-C Supreme, Mainz D2, and Darks Resonance Control T2 Supreme are digital-signal-distribution and resonance-control products; the Digitalz is an Ethernet cable, while the Darks are resonance-control devices. The page also lists Titanium Balls for Darks, but provides no further technical specifications, materials, or circuit topology.

The Ansuz Digitalz D-TC Gold Signature is a digital cable with BNC/RCA termination, manufactured by Ansuz. It has gold-plated connectors, one shielded conductor made of gold- and silver-plated copper, and a Signature housing with a zirconium, tungsten, aluminium titanium nitride, and zirconium coating structure. Its topology includes 12 double inverted helix Tesla coils, two 37 cm anti-aerial-resonance Tesla coils, eight 70 cm active cable Tesla coils, charged dielectric technology, an active zirconium cable anti-aerial-resonance Tesla coil, and a required Ansuz PowerBox connection; the standard length is 2 m (78.7 inches).

The Ansuz Digitalz D-TC Supreme is a digital cable with BNC connectors, made by Ansuz. It uses gold-plated connectors, 1+12 shielded silver-plated copper conductors, and a Supreme housing. Its topology includes 12 double inverted helix Tesla coils, two 37 cm anti-aerial-resonance coils, 16 active cable Tesla coils measuring 70 cm, required Ansuz PowerBox connection, and charged dielectric technology.

The Ansuz Digitalz D-TC2 / USB is a USB cable manufactured by Ansuz. It has gold-plated pure-copper connectors and four conductors made from shielded, silver-plated copper wires. The cable incorporates 12 passive end Tesla coils, 16 passive cable Tesla coils, 4 active cable Tesla coils, charged dielectric technology, and an Ansuz PowerBox connection, which is listed as required; standard length is 2 m, with USB A-B and USB A-C terminations.

The Ansuz Digitalz D2 is an Ethernet cable manufactured by Ansuz. It uses RJ45 termination, gold-plated pure-copper connectors, a chromed-steel housing, and 4×2 individually shielded twisted pairs with shielded, silver-plated copper conductors. Its topology includes two passive end coils, a passive cable Tesla coil, and an active cable Tesla coil; the listed standard length is 1 m (39.4 inches).

The Ansuz Digitalz P2 is an XLR digital cable manufactured by Ansuz. It uses a twisted-cable construction with two shielded, silver-plated copper conductors, pure-copper connectors, and a chromed-steel housing, along with double inverted helix Tesla coil, active cable Tesla coil, Ansuz PowerBox Connection, and charged dielectric technology.

The Ansuz Digitalz X2 is a USB cable manufactured by Ansuz. It uses gold-plated pure-copper connectors, four shielded silver-plated copper conductors, and passive end coil technology with one 49 cm passive cable Tesla coil.